Land drains or the perforated drainage pipes are common terms that are mentioning the drainage pipes. The perforated drainage pipes are used in domestic, commercial, agricultural and industrial areas to stop the ground being waterlogged. Waterlogged is due to excess water that is present in the ground or due to an impermeable type of soil or clay. The water can be removed and it will be flooded to other areas with the help of these drainage pipes.
This process should be done with the help of PVC pipe connectors. These PVC pipe connectors are used in a variety of plumbing actions. The good connector should not leak the water to the soil. To know about the drainage pipes you can have a look at the following content.
Working principle of drainage pipes
The drainage pipes are working by allowing water to flow from the ground into a pipe where the area is affected by waterlogged. The soil will get saturated either by type of soil is presented on the place or how much the rainfall that has occurred in that particular area. If no water is absorbed in the place then it will lead to waterlogged. This waterlogged should be absorbed with the help of the perforated drainage pipes.
Once the water is sucked with the help of drainage pipes, then it will flow the water to the designated disposal point. The drainage pipe has made up of layers; layers of loose aggregate or shingles surrounding. This layer will help the water to travel with a clear direction in saturated and compacted soil conditions. The water from the drainage system is usually going to nearby water sources.
At what places these drainage pipes should be installed?
The best place to install the drainage pipes is the place where these waterlogged has occurred more or the place where the soil badly produced percolation test results. Normally these drainage pipes will be installed in garden or land is at the risk of waterlogging or the soil where it produces the bad percolation test. Make sure that the local authority has made a plan to deposit these collected water from the drainage pipes.
Normally the drainage pipes are having a maximum capacity of waterlogged. When directing the water to the drainage, the council is allocating the maximum flow rate of water. This flow rate will tell the deposition of water into the storm drain.
Installation tips for drainage pipes
The drainage pipes can be installed with the help of PVC pipe connectors. Some tips should be considered in the installment process.
- The sedimentations of the soil and water should not cause any damage or blockage in pipes.
- The drainage pipes should follow the sensible gradient.
- The third one will be choosing of right soak away crate for the drainage pipes
- Finally, it should have the proper plan to obtain the maximum efficiency from the drainage pipes
These are some tips that should be considered for the installment of drainage pipes.
Final Thoughts
Now you can get the basic idea about the drainage pipes and its working principle. With the proper installment of drainage pipes, you can get the advantages of those drainage pipes.